LumberJocks

Reply by woodrookiepatriot

  • Advertise with us

Posted on Hardware problem

View woodrookiepatriot's profile

woodrookiepatriot

16 posts in 146 days


#1 posted 08-07-2021 07:16 AM

I have broken off screw heads before, from over-torque-ing, and the screw breaks off where the shank meets the head, but I have never seen screws snap off with a c;lean hole in the middle of the head like this. I wanted to clarify, these were not Hillman screws. These were the screws that came with a set of hinges from ACE. I did solve the issue by waxing the threads before screwing them into the pilot holes, and that seemed to do the trick. I was just shocked to see these screws fail “where” they failed. I’d never seen a screw-head snap off and leave a clean hole right in the center like this. Thanks once again for all the imput! You guys rock!

-- BAM


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com