LumberJocks

Reply by WoodenDreams

  • Advertise with us

Posted on Router extension table for Griz 1023

View WoodenDreams's profile

WoodenDreams

1432 posts in 1152 days


#1 posted 07-27-2021 03:40 AM

Having a router extension wing on the table saw can serve three purposes. 1st is saving valued space in a small shop, 2nd is extra table width on the table saw for support when cutting wider boards, 3rd is extra space to set stuff on or working table space. The only disadvantage for this is the need to remove and reinstall the fence at times (if you don’t use the router a lot, only a extra minute to add or remove the fence). A separate dedicated router table is nice if you have the extra space. If you go the Benchtop route, you can clamp it to your work bench and remove it after the use of it. It does though cause a higher working height.

I have a Craftsman benchtop router table. When I made a workbench for along a wall, I made one section with a lowered drop to fit the benchtop table. Worked out rather nice for me. I decided to add a second router table via the router wing on the table saw for a extra router table.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com