LumberJocks

Reply by WoodenDreams

  • Advertise with us

Posted on Router extension table for Griz 1023

View WoodenDreams's profile

WoodenDreams

1433 posts in 1161 days


#1 posted 07-26-2021 07:39 PM

You can mount the wings on either side, which ever side works best for you. I would suggest figuring out which router lift you’d like to use first, then match a the table saw router extension wing to match it. The openings are different depending on the different wings available.

I suggest not to use the Grizzly T1244 router extension wing. Unless you plan on a DIY lift. Grizzly does offer two other wings. The bolt holes seem standard for installing other brand wings. If not, you can drill out matching mounting holes for other brand wings that will match the router lift your interested in.

Reason; It states 16”x27”, but my is actually 16”x26 7/8”. Had to use fender washers to make up the gap for the back rail. And this particular wing has a odd size opening for a router lift, 9”x12 1/8”. I didn’t realize grizzly didn’t have a router lift available for this size. Their T31637, 9”x12” lift will not fit. Their customer service says they don’t offer a router lift for this wing, and other brand lifts won’t fit it. So why did they use this size opening. I didn’t find this out till after I put it on my table saw.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com