Reply by Marpel

  • Advertise with us

Posted on Hanging Wall Display

View Marpel's profile


66 posts in 1537 days

#1 posted 07-25-2021 03:00 AM

Sycamoray and Madmark2,

Thanks for the responses. Not sure if my initial explanation was sufficient and complete enough to be on the same page. So I have drafted up a quick image (hopefully it will work, as I have not done this before).

The images in the actual display will be family photos, but figured this will suffice. This is intended to depict a two layer display and the draft is not properly set up regarding space between images, but that would have taken me longer to do. When done, each image will have the same proportional distance from another – not sure what that is yet, either.

I am trying to do this free-standing and not on a larger backer board, as I intend to add further images in the future so the display can

“grow” across a wall. But if the glued joining corners will not hold it together, that may have to change.

As in my image, the underlying pieces will have the appropriate corner(s) removed of part of it’s image so I may glue wood to wood surface.

As stated, I am in the initial stages of this project and am seeking input as to the feasibility of the glue-up method, and if not some suggestions on a connecting system.

Again, thanks for the replies,


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics