Reply by bilyo

  • Advertise with us

Posted on Help repairing a roller stand

View bilyo's profile


1406 posts in 2342 days

#1 posted 07-23-2021 09:25 PM

Not sure if the OP is still here. But, for anyone still interested, I think there is a simpler solution. Bolt on a piece of 1/2” to 3/4” wide mild steel 1/8” thick strap using the two existing socket head screws. Or, if the bolts are not long enough, replace them. Then drill and tap a new hole through all three layers of steel. Insert a new bolt with a shop fashioned knob or handle.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics