LumberJocks

Reply by bilyo

  • Advertise with us

Posted on Help repairing a roller stand

View bilyo's profile

bilyo

1406 posts in 2342 days


#1 posted 07-20-2021 08:49 PM

Drill out the existing screw hole. Then, get a flanged nut like this and silver solder (braze) it over the larger hole. Silver soldering is strong and is easy to do with nothing more than a propane or Mapp torch. There are lots of web sites and/or videos that show you how. You will need some 56% silver solder (small quantities available on Ebay for under $10), some proper flux, and a torch. The flanged nut will provide additional surface area for brazing and make it even stronger. Then use a larger bolt with a shop made knob.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com