LumberJocks

Reply by splintergroup

  • Advertise with us

Posted on Help repairing a roller stand

View splintergroup's profile

splintergroup

5869 posts in 2467 days


#1 posted 07-20-2021 04:59 PM

I’d use a “T” nut:

Hammer or pliers to flatten the spikes then drill your stripped hole out to the size of the OD of the T nuts threaded shaft.

Insert the T nut from the inside of the flange (might need to bend the flange outwards slightly).

Generally the tightening of the lock screw will put enough force on the T nut to keep it from spinning, but you could peen around the flange hole with a center punch to displace enough metal to better grab the nuts shaft.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com