LumberJocks

Reply by HokieKen

  • Advertise with us

Posted on Help repairing a roller stand

View HokieKen's profile

HokieKen

19367 posts in 2381 days


#1 posted 07-20-2021 01:33 PM

Helicoil is best solution but probably too costly to be effective if it’s for a one-time use. Welding a nut on is certainly a good solution too if you have the capability. The simplest solution might be to drill it out and tap for a larger size bolt if you have a tap available.

If you don’t need infinite adjustability in the height, you could just drill a series of holes in the inner bar and use a pin to hold position. Think automobile jack stands.

-- I collect hobbies. There is no sense in limiting yourself (Don W) - - - - - - - - Kenny in SW VA


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com