Reply by CaptainKlutz

  • Advertise with us

Posted on Machinery Maitenance

View CaptainKlutz's profile


4442 posts in 2573 days

#1 posted 04-09-2021 12:36 AM

No need to tip machine. 99% of gear box oil drains out bottom hole.

IMHO – common to find a 15” planer missing half the oil.
Thanks to internal gear design, even half empty; the planer still runs and is not damaged. :)

Need to find oil leak.

Check the inside face of gear box for oil residue. If crusted with oily wood dust; might need a new cutter head oil seal? Oils leaks at the inside of cutter head will hide from you. Wood chips from planning will scrape off oily residue, and get sucked up your dust collector. All that is left behind is sawdust and oily film. When full the gear oil is just below the bottom of seal, so it rarely drips down gear box case; unless the seal is toast.

IME – The speed shift lever is easily bent. The material used, length, and location of the shift knob is perfect place to guarantee it gets damaged when planer is moved around on a mobile base.

If shaft is bent, don’t force it to shift speeds.
The tolerances on the cast iron gear box lid bore for that shaft are very close, due o-ring oil seal. If you attempt to straighten the shaft, WITHOUT tear down of the gear box for shaft removal, and force the shaft to move; can damage the bore in the cast iron gear box cover, and create a permanent oil leak. Once a bent shaft is forced to slide in-out; fixing the resultant oil leak requires a new gear box lid, and a new shaft/seal (unless you are machinist type).

Even on rebuilt machines with new gear box lid, new shift shaft, and fresh metric o-ring; would still find occasional oil weep past the o-ring. IMHO – The speed shifter design is a poorly done and weak link on the otherwise bullet proof 15/20” four post planers.

PS – While doing maintenance, remove the cover over the drive chains over the gar box, and check the in-out feed bushings. If these have not been oiled regularly (weekly per manual); they can wear oblong. This wear allows feed rollers to move up/down, which makes it impossible to obtain consistent feeding.

Best Luck.

-- If it wasn't for bad luck, I wouldn't have no luck at all, Doom, despair, agony on me… - Albert King - Born Under a Bad Sign released 1967

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics