LumberJocks

Reply by JonCrafting

  • Advertise with us

Posted on Is it possible to run a 2hp Dust Collector and Saw on a single 240v/30amp dryer circuit?

View JonCrafting's profile

JonCrafting

17 posts in 436 days


#1 posted 03-29-2021 11:52 PM


Thanks for the additional comments.

@iblewjon Not sure, where your info comes from, but “2 HP, 120V/240V (prewired for 120V), single-phase, 15A/7.5A ” is strait off of the grizzly website, for the Shop Fox W1837. I can t argue based on personal experience, I m just going off of the specs that have been made available.

- JonCrafting

That is probably the National Electrical Code rating. About 15 or 20 years ago all the power tools HP doubled. I believe they started using locked rotor current instead of full load to rate HP ;-((

- TopamaxSurvivor

Thanks TopamaxSurvivor. So you are saying that either the HP or the Amp draw listed on the Grizzly website is not accurate and is based on an older formula? I can understand companies picking and choosing the formula they use for different specs in order to improve marketing, but was not aware this was the case for Grizzly/Shop Fox.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com