LumberJocks

Reply by Jopldangla

  • Advertise with us

Posted on G1021x2 Planer - Carbide Inserts & other questions

View Jopldangla's profile

Jopldangla

53 posts in 206 days


#1 posted 03-10-2021 12:41 PM

Thank you both for the good info and site references. I ended up grabbing a pack of carbides off of eBay (from China). I checked out the rest of the cutters and it looks like they have 2 cutting surfaces left (one or two had a small chip on a corner of a carbide) so I will use this 10pack to replace any missing or damaged ones… when I get to the point of needing to rotate.
Good point on the torque wrench. The manual says a small amount of machine oil and a torque wrench. They use the oil so the coefficient of friction is consistent and the resulting torque (ultimately the preload on the screw) is consistent.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com