LumberJocks

Reply by LeeRoyMan

  • Advertise with us

Posted on Best way to build these tables?

View LeeRoyMan's profile

LeeRoyMan

1703 posts in 804 days


#1 posted 03-08-2021 03:05 PM

Lots of ways depending on what you want for the final look.
Here is one way.
You could make 2 face frames, 1 for the front and 1 for the back. Rabbet the outside for 1/2” material.
Rabbet the inside for 1/4” material. You could use veneered plywood for the panels, situate the panels so that you attach the top first, then the sides, then all you need to veneer would be the top to cover the end grain.
You don’t need any kind of honeycomb centers.

I made something similar using all plywood, then veneered everything. If you’re interested in that rout I could show you pictures.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com