LumberJocks

Reply by Aj2

  • Advertise with us

Posted on sharpening inside of carving tools. What do you use?

View Aj2's profile

Aj2

3826 posts in 2875 days


#1 posted 03-05-2021 03:02 PM

The only wood carving tool I need to sharpen on both side is my bend hook knife for spoon carving. It didn’t come ready but it was close.
My v gouges are the hardest to get right but all of them only get buffed on fluffy cotton wheel on the inside. Once I get the bevel side geometry right then both side are kept sharp with cotton wheel. I do use a red jewelry rouge.
So the short answer is no stone for the inside faces only cotton buffing wheel.
I offer this pic for your consideration to decide if my words hold water.

Good Luck

-- Aj


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com