Reply by cut50

  • Advertise with us

Posted on Delta 36 725T2 starter capacitor issue

View cut50's profile


30 posts in 4113 days

#1 posted 03-02-2021 05:21 PM

What you described was exactly what my table saw did, which is a cabinet saw, so the motor is enclosed. By your photos you have a contractor saw, so the saw dust would not be near the issue. Had to spin the blade to get the saw to work, not the safest thing to do, for sure.
As I said I just blew the fine dust out of the switch area and sealed up some small holes in the motor casing, and have had no more problems. Not turning on my DC for every cut was most of my issue.
I really do not know that much about centrifugal switches, if you do use a lubricate make sure it`s what call a “dry” one, any oil on it will hold the dust.
I live where it`s winter for 5 months, and my 3hp dust collector is in the cold all the time and works in any temp
I ask it to. The cold will slow things down some but that is usually over in less than a minute.

There are people here that can help you with your switch issue far better than I can, I just luck out with my problem, sure someone will be along with more help.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics