LumberJocks

Reply by Sean_F

  • Advertise with us

Posted on Questions about flattening workbench top/bottom

View Sean_F's profile

Sean_F

10 posts in 78 days


#1 posted 03-01-2021 01:53 PM

Thanks for the advise Ray, I think I may try that. I built the router sled last night. Checking with a straight edge,the sled seems to have a slight hump in the middle of where the router rides. But is flat on the bottom side. Since I already put the sides of the sled on, I guess I’ll try sanding the hump out as it’s very slight.

I took a ton of time picking plywood for this that was flat and straight. Only thing I could find that was like that at big box stores was 3/4 oak ply. Even the 3/4 mdf was warped. Pretty frustrating.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com