LumberJocks

Reply by RClark

  • Advertise with us

Posted on What table saw blade or bit do you recommend

View RClark's profile

RClark

124 posts in 3260 days


#1 posted 02-25-2021 11:38 PM



So guys, this blade will work ok?

https://www.amazon.com/CMT-256-050-10-Industrial-Combination-Grindwith/dp/B000P4NTRC/ref=sr_1_15?dchild=1&keywords=flat+bottom+saw+blade&qid=1614285309&sr=8-15

or this one? https://www.cshardware.com/cmt-p10050.html

We only have a Lowes store here and the selction isn t so good. Is there one in Lowes that you know would meet these needs. The way they have these labled confuses me. Some don t even have a designation.

I have my whole kitchen to do then no more. larry
P.S. I may run down to Keim Lumber in Charm tomorrow as I am in a bit of a hurry.

- ohtimberwolf


Right now, looking at the listings, I would have to say neither one of those blades will cut a flat bottom.

First, other listings for blades that cut flat-bottoms are usually clear about that feature. Neither one of the listings states a flat-bottom cut specifically.

Second, the Amazon listing has a drawing of the grind specifications. That drawing shows a .006” difference between the top of the flat tooth and the top of the beveled tooth AND the beveled tooth is higher than the flat grind tooth. Here’s a snip:

-- Ray


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com