LumberJocks

Reply by Scott1965

  • Advertise with us

Posted on When is wood,not considered green anymore???

View Scott1965's profile

Scott1965

7 posts in 104 days


#1 posted 01-11-2021 10:17 PM



Many hand tools come to the user pretty dull, so if you haven t set a good edge to them I would suggest that as a possible step.

A lot of hand carving of spoons and such is done on green wood. Your Cherry has been outside in your drive for 2 years. But you don t say how thick it is? Much wood is pretty air dried at 1 year per inch. Plus you don t mention if that Cherry came from a tree just fallen, or did it just come to you, where possibly it s been drying a long time?

Maybe find a 2×4 from the borg, and try it out against your tools. Most “kiln dried” 2×4 s are still plenty wet enough to be close to green wood, and softwoods are infinitely easier to carve than hard, even though Cherry is a lightweight of “hardwoods”

That would allow you to gauge the cutting edges, and see if they just don t need a good sharpening.

- therealSteveN

The cherry wood is a log about 16” across and 3 feet long. I don’t know how long it was cut before given to me. And I’ve had it 2yrs.
I’ll do what you suggested regarding the blades etc


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com