LumberJocks

Reply by Loren

  • Advertise with us

Posted on Is there a jig or a way to bring the studs of a wall frame in the same plane (prep for tiling)?

View Loren's profile

Loren

11014 posts in 4656 days


#1 posted 11-27-2020 06:04 PM

I’ve used levels and string wound around nails to figure out that sort of thing. If you have a 4 ft level that might be a good one to use. You’d be using it both to assess deviations from plumb but also straightness in the studs. You don’t need everything plumb but you do need to find the high spots.

You can also shim the corners until the diagonal strings touch in the middle. Then shim from there based on those corners being in the same plane. This may be the more sensible approach than planing the studs down.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com