Reply by WoodenDreams

  • Advertise with us

Posted on Dear plywood manufacturers,

View WoodenDreams's profile


1185 posts in 829 days

#1 posted 09-26-2020 01:48 AM

I normally don’t use plywood or MDF on any project. But, I just finished making two shed doors for a customer. He wanted 1 1/2”x 5 1/2” rails and stiles with 3/8” plywood for center panels with center trim pieces to stiffen up the plywood in the doors. I usually figure 1/32 to 1/64 inch narrower dados for the plywood to eliminate slop. Turned out the plywood was actually 3/8” thick. Good thing I didn’t make the dado cuts before the plywood was delivered to me. Would of had to recut the dado slots.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics