LumberJocks

Reply by Perplexed1ne

  • Advertise with us

Posted on Actual numbers for comparing a long radius 90deg vs 2 45deg elbows

View Perplexed1ne's profile

Perplexed1ne

25 posts in 223 days


#1 posted 09-25-2020 08:56 PM

I am figuring out how to use the calculator and appreciate all of the help. I want to get this up and running and before I become an engineer. Since I am in no danger of becoming an engineer, might as well get this up ASAP. But, it costs no more to do it right than to just cobble it together with less optimal results.

In choosing to split the intake at a machine between the machine’s top and bottom, like a miter saw or table saw, would there be a difference between a 6×6x6 wye that had the reducers to 5” and 3” after the wye fitting closer to the machine, OR use a 6×5x3 wye and run that size duct to the top and bottom.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com