Reply by LittleBlackDuck

  • Advertise with us

Posted on Dear plywood manufacturers,

View LittleBlackDuck's profile


5977 posts in 1743 days

#1 posted 09-25-2020 01:45 AM

Can’t help you with the ply dillema… I bite the bullet, put on my Trend full head shield and work with MDF (6mm in this case)... at least the MDF has a better standard deviation distribution.

You think you have problems with ply… just wait till you try the same comparison with shop vacs and their respective hoses and dust ports.

-- If your first cut is too short... Take the second cut from the longer end... LBD

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics