Reply by LittleBlackDuck

  • Advertise with us

Posted on Case miters with a router

View LittleBlackDuck's profile


5976 posts in 1742 days

#1 posted 09-21-2020 12:14 AM

With the added picture it’s obvious you have the table.
You need a fence… even if it’s just a board clamped to the tabletop (if the fence is for whatever reason impossible/impractical).
As Ala’G suggested, hog out some of the mitre on the tablesaw to make life easier… Alternatively sneak up on it on the router “fence” in 1/8” (or so) increments for cleaner results… just endure you feed all the pieces through before advancing the fence…
Make sure you use a backing board for endgrain passes.

-- If your first cut is too short... Take the second cut from the longer end... LBD

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics