Reply by recycle1943

Dave – here’s what happened today – all of them are 1/16” over size to allow for sanding. If you want, I can take 1/32” off each edge on the table saw

2 – 3” x 29” x 3/8” wormy
2 – 3” x 29” x 1/4” wormy
4 – 2” x 29” x 3/8” wormy
4 – 2” x 29” x 1/4” wormy
1 – 1” x 29” x 3/8” wormy
1 – 1” x 29” x 1/4” wormy

Should give you a pretty good start

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them