Reply by 12bar

  • Advertise with us

Posted on Do I need a composite pin nailer

View 12bar's profile


57 posts in 1446 days

#1 posted 09-19-2020 05:58 PM

I took the suggestion of turning the cabinet around and measuring diagonally from the outside instead of the inside from the front.
BIG DIFFERENCE! Outside dimensions are 33 1/4 by 33 5/16. So I am only out of square 1/16 of an inch. I then put a carpenter square checking all the corners on the outside and the corners are either square or 1/16 on one corner and 3/32 on another corner.
I think now with all your help, and thank you for all of it, my drawers will fit even if I need to shim one about 1/16”.

-- 12 Bar

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics