LumberJocks

Reply by SnowyRiver

  • Advertise with us

Posted on Resawing Blade For A Bandsaw

View SnowyRiver's profile

SnowyRiver

51458 posts in 4092 days


#1 posted 11-26-2012 08:31 PM

Thanks for all the good info folks. I am going to look for a new blade. Guess I will do a 1/2” and be safe that it will fit the saw OK. The manual lists 3/4 inch as a possibility too, but it also lists 93 1/2 length and 105” length for my saw so not sure what I would have to do to use a 105” blade other than add a riser block, but I have only seen them in the 6” range. I would think the blade would then be around 100 inches. I had read once that a riser block can make the saw unstable…not sure if this is true. Kind of wondering if it would be a good addition to do it now so I can buy the right blade length as long as I have to buy a new blade anyway. Thoughts ??

-- Wayne - Plymouth MN


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com