Reply by Rich1955

  • Advertise with us

Posted on Riving knife binding

View Rich1955's profile


384 posts in 634 days

#1 posted 08-05-2020 12:45 PM

the saw is a cheap craftsman job site saw. I tried moving the knife it helped a little. removing the knife is and idea but it is a witch to install, they use a one sided wing bolt. I am going to check and see if I can replace it with a hex bolt. The riving knife will loosen and touch the blade. The riving knife is a tad thicker than the blade. any sugestinons on widening the slot in the sled fence thanks Mike

- Karda

If the riving knife is thicker then the blade, you have the wrong blade installed. the knife and blade should be the same thickness.

-- Rich

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics