LumberJocks

Reply by MrUnix

  • Advertise with us

Posted on Bosch GTS1031 - motor taken apart - armature help

View MrUnix's profile

MrUnix

8213 posts in 3053 days


#1 posted 07-15-2020 09:30 PM

You don’t need a puller, but it does help. However, for the bearing shown, you may not be able to get the fingers under it due to tight clearance with the fan. Usually for those, a bearing splitter is used. But an easy way to do it without either is to hold the bearing secure in a vice and tap the shaft down and out with a dead blow or wooden mallet.

As for the grease – I just use whatever wheel bearing grease I happen to have on the shelf at the time.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com