LumberJocks

Reply by LittleBlackDuck

  • Advertise with us

Posted on CA Finish on a Pen leaving pits and imperfections.

View LittleBlackDuck's profile (online now)

LittleBlackDuck

5492 posts in 1675 days


#1 posted 07-02-2020 03:43 AM

I always use thin CA at 1800 revs… apply anything up to 20 coats which gives a decent layer. I then go through the acrylic polishing pads range starting at 600 (usually start with 400 then 600 sandpaper then move onto 600 pad) up through the supplied range.

No idea whether it may or may not be important, however, if old practices no longer work, have you considered the quality of the CA. CA has a limited shelf life, especially in the open. I keep my CA in a bar fridge and threw a heap out when I discovered their limited shelf life… just a thought.

-- If your first cut is too short... Take the second cut from the longer end... LBD


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com