LumberJocks

Reply by jdh122

  • Advertise with us

Posted on Exterior door glue up question

View jdh122's profile

jdh122

1179 posts in 3700 days


#1 posted 04-18-2020 03:54 PM

I’d probably glue all of the boards on both ends, so in the rails and the spline. But I would make sure that none of the boards were glued to each other, by leaving an inch or so on both sides of the joint that are not glued (I’d probably put a bit of wax where I didn’t want the glue). Then the wood could move a little seasonally, and the expansion would only be over each individual board rather than over the whole piece.

-- Jeremy, in the Acadian forests


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com