Reply by JNP

  • Advertise with us

Posted on Ideas needed on this !

View JNP's profile


113 posts in 3139 days

#1 posted 11-19-2012 06:44 PM

Okay. I think you’re going to have to buy the forstner bit.

- start with your largest hole saw and move progressively down in diameter then chisel out the remaining ridges
- if you have the drill press and a beam circle cutter I’m guessing you could hog out the material that way
- use chisels and cross hatch the area to get down the to appropriate depth then pop out the remaining bits and scrape/sand the bottom smooth
- slice the top off your piece at 1/8 or 1/4” thick, cut the hole all the way through that and reglue/sand to blend.

-- Jeff

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics