LumberJocks

Reply by JimRochester

  • Advertise with us

Posted on Laguna P/Flux 1 early review

View JimRochester's profile

JimRochester

574 posts in 2534 days


#1 posted 04-03-2020 09:43 PM



I also use a garbage can separator on most machines. The only machine I have hooked directly to the collector is my table saw. Router table, drum sander, planer, belt sander all run through the separator first. If I didn t use that I d probably only get a week between cleanings and I m strictly a hobbyist.

- JimRochester

Are you sure that separator is not causing more problems than it is solving? I have the Jet version of this type dust collector and I would never have to empty the fine dust bag if I remember to empty the chip bucket.

- Davevand

I would assume it helps. I usually have a full can every other week. If it wasn’t there that would go directly to the collector. That onboard unit isn’t that large so that would probably be full every week too. Then the finer stuff goes to the filter and the connected canister underneath. If there is someway having that extra step is somehow detrimental I would appreciate knowing it. I will certainly remove if it is.

-- Schooled in the advanced art of sawdust and woodchip manufacturing.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com