LumberJocks

Reply by MrUnix

  • Advertise with us

Posted on Restoring Rockwell/Delta 4" Jointer 37-000

View MrUnix's profile

MrUnix

8097 posts in 2975 days


#1 posted 04-02-2020 10:18 PM

Son of a salamander… never seen one of those and they are not in any of the Delta/Rockwell catalogs that I can find! Anyway, I don’t believe that is a standard V-belt… it’s more of a small serpentine type from the looks of it. It is a small little thing, and I doubt you will find it at any auto parts store – but Renovo says they still have them and they are only about $8.

So everyone knows what the machine looks like, including a good shot of the underside showing the motor and belt, here is a good photo entry of one over at the vintage machinery site: 37-000 Compactool

And here is a shot of the belt from Renovo:

At least that explains why I couldn’t cross reference it – my list is only for Delta/Rockwell V-belts and pulleys :(

For your knives – manual states it takes the #37-026 set, which is pretty common across most of their 4” jointers. Those are 4-1/8” long by 5/8” wide, 3/32” thick – but they don’t have to be exact. A 4”x5/8” knife will work just fine, such as the Freud C310 set.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com