Reply by bandit571

  • Advertise with us

Posted on Any idea how to get the chuck apart on this brace?

View bandit571's profile


25919 posts in 3460 days

#1 posted 03-29-2020 08:45 PM

Well, here ya go…since I already did..

6 inch sweep Keen Kutter brand…fully boxed…circled is an oiler hole, and the set screw to hold the ball bearings in..

10” sweep, older, non-boxed prawls. Has an extra oiler hole…Metal bands are Pewter.

Head or top handle. Has no oiler hole, however, IF you apply a light bead of oil where the two metal parts connect, then give things a spin….the oil works it’s way inside…things turn way much better..

Ran these all the way out..until they stopped….seems they are pinned in place on the inside of the chuck….jaws will hold a normal twist drill’s round shank just fine….and securely.

-- A Planer? I'M the planer, this is what I use

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics