LumberJocks

Reply by tvrgeek

  • Advertise with us

Posted on Drill Press Quill Travel - How much do you *really* need??

View tvrgeek's profile

tvrgeek

1859 posts in 2728 days


#1 posted 02-20-2020 09:06 PM

Bruce, may be a great tip where to find a motor and controller cheap. Lots of treadmills out there where the only exercise they provide is moving it across the basement. A 1.75 HP DVR with controller runs about $650

Got my Delta set up. Somehow I have more space now.

Captain, No “standard” chip clearance depth. Jobber length depend on diameter. Stub bits only about 1/2 inch. Forstner, Spur, spade, and any length you want. Sure, once about three inches one has to do extra effort to clear the chips, Wood or metal. I decided I woudl continue to finish deep holes by hand and save me a grand. At least for now.

Andre, won’t touch that!

I suspect within a few years DVR motors will be far more common.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com