LumberJocks

Reply by CaptainKlutz

  • Advertise with us

Posted on How do I make this? A three piece corbel painted on the outside and stained on the inside.

View CaptainKlutz's profile

CaptainKlutz

4910 posts in 2742 days


#1 posted 02-20-2020 05:23 PM

Easy.
Sand both contact surfaces with 40-60grit, exposing the wood; and use what ever glue you want.
Mask the inside exposed edges on outside corbel before sanding.
The large grit will leave enough surface area that almost any adhesive can form a strong bond, even with little paint/stain left behind.
If plan is outdoor use, the a slow cure epoxy would be my adhesive of choice.
Plus if you get a little squeeze out, the clear epoxy will be less noticeable.

YMMV

-- If it wasn't for bad luck, I wouldn't have no luck at all, Doom, despair, agony on me… - Albert King - Born Under a Bad Sign released 1967


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com