LumberJocks

Reply by LesB

  • Advertise with us

Posted on Adjustable height (for the top) workbench and support for tools and outfeed table

View LesB's profile

LesB

2983 posts in 4522 days


#1 posted 12-11-2019 07:01 PM

So, this discussion spurred me into looking at some sort of jack system and I found scissor jacks from the basic automotive types for around $25 (some had mounting flanges on the top) to motorcycle jacks with larger platforms in the $60+ range. You might even find old car scissor jacks at the wrecking yard even cheaper.

I think I will add one of these to the bench design I posted above. That way I can release the 4 corner clamps adjust the height with the jack and re-clamp it. If the floor was uneven minor adjustments could be made by hand to level the top.

-- Les B, Oregon


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com