LumberJocks

Reply by 4wood

  • Advertise with us

Posted on What specialty screws or what else should I use to make this router table adjustable (height wise)

View 4wood's profile

4wood

73 posts in 922 days


#1 posted 11-08-2019 02:13 PM

The top nut must be fastened to the bracket in order to make the adjustment. If the bracket is thick enough you could tap some threads in it and eliminate the top nut and use the bottom nut to secure the adjustment. Welding or adhering the nut to the top of the bracket would also work. Another method would be to cut a piece of plywood the size of the bracket bottom fasten it with screws to the bracket and install a T-Nut in it. Keep the bottom nut on the adjuster and tighten it after the adjustment is made.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com