Reply by d_sinsley

  • Advertise with us

Posted on where to buy 1/2" bore shaper cutters

View d_sinsley's profile


105 posts in 62 days

#1 posted 08-22-2019 06:51 PM

With that machine, you will need to take it easy. I have heard of the shaft bending. Take light cuts.

- ibewjon

It is a very light duty machine. So this is wise advice. Hence the question about 3/4” cutters. For the $25 I paid for it I think it will make a nice little router/shaper for my existing router table I made. The key I need to keep in mind is that even with this machine it is a router and not a shaper, and a light one at that.

Using the 3/4” cutters but keeping them to the same diameter as the 1/2” cutters is also good advice. Never considered the fact that larger diameter cutters require more to turn.

-- Devon

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics