Reply by splintergroup

  • Advertise with us

Posted on Need to cut multiple bevels

View splintergroup's profile


2908 posts in 1729 days

#1 posted 08-20-2019 01:56 PM

Hand tools in the right hands are the easy way to go, but a jig and your TS (or a router) will work. The problem is indexing accurately. Conciebably you could build a frame around your workpiece and use the TS to get 4 cuts at top/bottom of the jig then angle and raise the blade again to get 4 more. The workpiece could then be rotated in the jig for the next set of cuts. There are plenty of router jigs to google for that use an indexing pin to realign for each pass, but more that 8 facets gets difficult.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics