LumberJocks

Reply by AESamuel

  • Advertise with us

Posted on Smoothing plane - fine wood depressions

View AESamuel's profile

AESamuel

105 posts in 2067 days


#1 posted 06-27-2019 02:57 PM

If the lines are going in the same direction as you are planing they could be plane tracks, the corners of the iron digging in. This can be countered by cambering the iron slightly or feathering out the corners when sharpening. Bear in mind that even with rounded corners there is still a transition from straight iron to curved iron, and there is pretty much no way to avoid it entirely.
If they are going across the direction of planing it could be chatter, either because the cap iron and plane iron don’t have a good fit or because the wood isn’t held securely enough.

There are other reasons too, more info or pictures would help.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com