Reply by bilyo

  • Advertise with us

Posted on Leecraft TS insert is making me nervous

View bilyo's profile


777 posts in 1554 days

#1 posted 05-21-2019 07:02 PM

Before flipping the switch I now press down on the insert each time to make sure it s fully seated, but I haven t seen anybody else talk about any of this so I figured I should ask…


- CrankAddict

This suggests to me that the insert is not fastened down with anything. I always make my own inserts and once the blade slot is cut, the blade usually continues to rub a bit. No problem because my saw has two places where small screws threaded into the insert support tabs hold it down. This is a little inconvenient, but I have no concerns about it flying out. You might consider drilling and taping for some hold down screws (or at least one).

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics