LumberJocks

Reply by Tony_S

  • Advertise with us

Posted on 2 tablesaw questions - burning and mini-kickback

View Tony_S's profile (online now)

Tony_S

970 posts in 3476 days


#1 posted 04-07-2019 10:15 AM

The burning is the result of the tapered shape you’re cutting. As the blade starts cutting, you only have material on one side of the blade on initial contact, so it’s deflecting the blade to the left. The result is the right side of the teeth rubbing on the material. The problem goes away after the blade has corrected itself. Looks like a combination blade. Not the greatest for ripping, especially in this situation. Use a good quality, heavy rip blade and the problem should go away, or at the very least, improve greatly.

Kick back….your feather board created a pinch point. Get rid of it. You’re sled looks oversized and cumbersome to say the least. If you’re concerned about the sled drifting from the fence, put a runner on the underside of your sled and use the miter slot instead and get rid of the fence as well.

-- It is the mark of an educated mind to be able to entertain a thought without accepting it. Aristotle


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com