LumberJocks

Reply by Jason Lester

  • Advertise with us

Posted on 15" Buffalo Planer

View Jason Lester's profile

Jason Lester

47 posts in 1103 days


#1 posted 03-12-2019 04:48 PM



Table rollers go in from under the table….easy to see with the table raised up. Infeed/outfeed bolts are standard metric M8 I believe. There is a small set screw on the top side to lock the setting on the bed roller.
Good luck.

- furnman487

Ok thanks for the info. I’m hoping I can install the roller assembly fairly easy. I saw those set screws too. I have to clean those holes up as they have a lot of oily wood dust in them.

As for the in and out-feed tables. They stripped them out lifting with them. Probably bent them good too as they are just the metal bar with a single roller type. I’ll worry about those once it is working right. I’ll have to straighten them and maybe up-size the hole.

-- Jason


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com