LumberJocks

Reply by Raymer

  • Advertise with us

Posted on New plug for my Pot belly jointer, 3 wire

View Raymer's profile

Raymer

92 posts in 970 days


#1 posted 03-09-2019 11:12 PM



I know that this response is being very blunt BUT if I had just put out real money for a new/used tool, and then was asking on the net about wiring it up correctly,, I would just start looking for a licensed electriction . Seen too many
fires that started by electrial things set up wrong.
Remember that you are not in your shop 24/7 and a fire that may start small can grow fast.

Just my opinion.
Anne who know how to replace a plug on a lamp, but who knows enough to hire the knowledgeable worker
for things I am not sure I know.

- anneb3

I appreciate the response and you’re right to be careful, I used an electrician to up my residential service from 150amp to 250amp and run the 240 to my garage. However, since I was just replacing a plug, didn’t figure it should require an electrician call.

With that said, if I got hit by 220, maybe it would fix the TBI I got from shrapnel in the desert. Woodworking really has helped me deal with this.

-- -Measure once, cut twice, cut once more for good measure.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com