Reply by Dan Krager

  • Advertise with us

Posted on Supershop owners

View Dan Krager's profile

Dan Krager

4421 posts in 2748 days

#1 posted 02-28-2019 03:37 PM

No, I haven’t done that and yes I’ve considered it. But it’s no trouble to hold it…takes very little pressure and I can quickly take the router out of the cut if there’s trouble. A spring seems like it would get in the way as much as be helpful. It’s never going to be something I can walk away from, so this keeps me paying attention! :) I might consider a friction stop to hold the follower for cutting cylinders (like dowels) but there’s another type of setup I made for that purpose before the follower was made.

Notice that there is no center support on the 1” diameter spindle in this long cut, that’s how little pressure there is to the cutting action.


-- Dan Krager, Olney IL All my life I've wanted to be someone. I see now I should have been more specific.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics