Reply by Nuvigil

  • Advertise with us

Posted on Beginner questions, can you help?

View Nuvigil's profile


6 posts in 815 days

#1 posted 02-13-2019 07:52 PM

Thank you all for the advice. I ended up using the screws themselves to wrap the wire, tinned them, then screwed them in. I’m very happy with the solid connection.

Not normally a problem. Twist the wire tightly and maintain the twist while forming the hook.

Alternately, you may be able to use a crimp on tab.

What kind of fence does the saw have? If it has a single handle sticking out the front that you screw to tighten, get rid of it IMMEDIATELY. They will not hold their settings and are extremely unsafe, especially for a newbie.

The best way to go is build your own fence. Aftermarket fences will cost way more than the saw is worth.

John Heisz has a good DIY table saw fence check it out.

- rwe2156

The saw came with a fence and the prev. owner had attached wood to both sides of the fence. The knob on the front is to engage the gear for adjusting the fence position. To tighten there is a lever with some sort of rod spring mechanism attached to the other end. What do you think about this? I don’t like the fence, it doesn’t seem to have aged well to be square.

As I mentioned, I am trying to pay as much due diligence as possible when it comes to safety. The saw does not have a blade guard, anti-kickback knives, or a riving knife. Online parts from Sears (I guess they owned craftsman) returned unavailability for the blade guard mechanism for this machine, and when I look for knives on Amazon, all I see are results for zero clearance inserts, or riving knives that look specific to newer machines.

Some of the experienced woodworkers I see online are not using these mechanisms. Is that because they are experienced and know how to avoid accidents that these safeguards prevent?

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics