LumberJocks

Reply by Rayne

  • Advertise with us

Posted on Box joint blade set no longer cuts 1/4" kerf???

View Rayne's profile

Rayne

1298 posts in 2149 days


#1 posted 02-09-2019 11:49 PM



As for the rod not being exact, it s 16 threads per inch. I m no expert, but I think if it wasn t exactly 16 TPI, the nuts wouldn t fit.

- Dan Thomas

A good way to test this is can you wobble the nut on your sawstop arbor when loose? You shouldn’t be able to. Now do the same to the nut on your regular threaded rod. You should have some play. This can make a small difference. If you had your old saw, you could have tested it by using a standard blade and cut a slot in a scrap to measure the width of the slot to the actual, widest width carbide tip on the blade to see if there was a difference.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com