LumberJocks

Reply by Dan Thomas

  • Advertise with us

Posted on Box joint blade set no longer cuts 1/4" kerf???

View Dan Thomas's profile

Dan Thomas

160 posts in 604 days


#1 posted 02-09-2019 10:55 PM


My guess would be those blades are created as close to 1/4” as possible under the Metric system (6mm is .14 less than 1/4”).

- Rayne

I’ve thought some more on this, and I have an idea. Suppose the box joint set always cut a narrow kerf, but my old table saw was misaligned enough to cause it to cut a wider kerf – to the point where it evened out to 1/4”? I know I tuned up my old table saw at one point, but I don’t remember if it was before or after I cut the last box joints.

Would it be possible for a table saw to be misaligned enough to cut a kerf wider by .014”, and not be noticeable otherwise?

-- Newbie Dan, https://www.youtube.com/c/thenewbiewoodworker


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com