LumberJocks

Reply by Andybb

  • Advertise with us

Posted on Update on 2 mini laser engravers after 2 weeks of use

View Andybb's profile

Andybb

2495 posts in 1238 days


#1 posted 01-18-2019 06:20 AM

On another note….At one point I thought the laser had failed as it wasn’t printing but it occurred to me laying in bed that maybe the CA was too thick.

- Andybb

I had one today. I was engraving my logo on the bottom of a tray and looked half way through to see nothing getting etched. It took me a minute to remember that I d focused the laser earlier for the inside of a cover that was about 4 inches deep, so the laser was just a fuzz-ball for the tray.

- Rich

Oh. That’s impressive that it has that much range of focus. I wear a set of those $3 3x Harbor F. glasses when I focus to get the pin point as sharp as possible. If I had to do it again I might have gotten the 1500mW model (yes the one I sent back because I thought I wanted the open bottom.) :-) But now that I’ve got the jig working well I’m going to try and make 2 passes and see if the image is as crisp.

Sounds like you’re getting some use out of yours. Glad to hear it. Something tells me I might at some point down the road get a branding iron for the logo I don’t yet have.

-- Andy - Seattle USA


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com