Reply by steve104c

  • Advertise with us

Posted on carving large depressions in wood

View steve104c's profile


52 posts in 1743 days

#1 posted 01-13-2019 09:21 PM

Make a frame to slide router on. Make the frame with a radius and when you slide the router back and forth you will route out a concave. Make another frame to slide the frame you made for the router and as you route out, slide a little at a time down the length of the board while you route across the board. I made one of these to route out a concave on a piece of mdf for making guitar backs. Steve.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics